How should I clean the Flair 58 and its parts?

How should I clean the 58, and how often should I do so?

To clean your press stand: Simply wipe down with a clean cloth after use. Avoid use of cleaning agents or chemicals. 

To clean your brew head cylinder: Simply remove the plunger (use your lock-in stem to pull/wiggle it out the top of the cylinder) and wipe down the inside. Pull a water only shot to clean further.

Clean as needed or as desired: The puck screen will help prevent coffee grounds from entering the cylinder, so it will stay quite clean after each brew! 

For the Flair 58: Do not run under sink or you risk water getting to electrical components. 

To clean your plunger: Rinse with water and dry with a clean cloth. Afterwards, it is good practice to lightly lubricate the o-rings to re-encourage smooth travel, as you will have rinsed away the natural coffee oils that built-up. Simply apply a light application of food-safe oil and wipe away the excess. 

To clean your puck screen: Simply rinse with high-pressure using your sink sprayer after use. An ultrasonic cleaner works great for deeper cleans, too, if you have one on hand! 

To clean your portafilter: Knock out the puck after use and rinse under the faucet until clean.